Protective film for Auto Painting Cover Furniture;
Products protective film for furniture Description
good quality protective film for furniture;
grade A and B protective film for furniture;
transparent protective film for furniture;
MOQ can be 60000 square meters protective film for furniture;
carton outside packing for protective film;
supply free paid samples of protective film,
Products factory --shan county shannong glass fiber co.,ltd. Description
Our company is shan county shannong glass fiber co.,ltd. which has established more than 20 years.
Our company mainly productions are masking film ;protective film and glass fiber meshes;
self-adhesive drywall tapes and so on .We would produce more new products to the market.
There are 120 workers in our factory which are veteran workers with more than 10 years of service.
There are 8 large workshops in our company ,we can produce 10 0000 square meters glass fiber
cloths and 20000 square meters protective films one day.
FAQ
Q:What is the protective film?
A: Protective films are commonly used in everyday life to protect various surfaces from scratches, contamination, and other damage. However, during use, the protective film may encounter some problems. Here are some common problems and how to solve them:
Q:The film is not firm
A: 1: if the protective film falls off during transportation or use, it may be because the viscosity of the pressure-sensitive adhesive is not enough, or the surface of the profile is not clean when the film is applied, and there is dust or paint that affects the paste effect. The solution is to replace the appropriate pressure sensitive adhesive, increase the film pressure, or effectively clean the surface of the profile before the film.
Q:Two ends of protective film warp
A: 2: this phenomenon is usually because the protective film in the paste process of stretching a large degree, in the case of high temperature environment after the retraction phenomenon. The solution is to pay attention to the impact of environmental temperature difference on the use of the product, and avoid unnecessary surface stretching during the paste process.
Q:Protective film degumming problem
A: 3: When the user completes the installation and construction of the profile and strips the protective film, it may be found that the adhesive remains on the profile product. This may be because the pressure glue used in the protective film product does not meet the regulations, resulting in external tension greater than the internal stress. The solution is to use a clean rag dipped in a little alcohol, and repeatedly wipe the residual sensitive glue until it is clean.
Q:Difficulty in peeling the protective film
A: 4: The inability to effectively peel the protective film may be because the sensitive adhesive used in the protective film product is not a sensitive adhesive for the protective film, or the material used in the protective film master tape is too soft to withstand the pulling force when peeling. The solution is to choose a regular manufacturer to buy a suitable protective film.
Q:Residual glue problem
A: 5: The residual glue of the protective film has a great relationship with the peeling force of the protective film. To solve the problem of residual glue, the peeling force of the protective film should be the starting point. The stronger the viscosity, the worse the peeling strength may be, and the worse the quality of the adhesive, the worse the peeling strength.
If you want to know more informations ,please visit the website:www.snfiberglass.com;
or you can contact with alice whose mailbox is alicefu@shannongfiberglass.com.
Hot Tags: Factory supply Furniture Protective Film 55cm, China Factory supply Furniture Protective Film 55cm manufacturers, factory, Insulation Fiberglass Mesh, Self Adhesive Fibreglass Mesh Tape, Fiberglass Tape Roll, Fiberglass Mesh for Plaster, Protective Film For Marble Table, Dust Proof Plastic Masking Film
