What should I do if the furniture protective film can't be removed for a long time?

Sep 05, 2024

Leave a message

When the furniture protective film cannot be removed after a long time, you can try the following methods to remove it:

Use solvents : You can choose a mild solvent such as alcohol, wind oil or vegetable oil, apply it to the edges of the protective film and wait a few moments before trying to peel it off. These solvents can help soften the glue, making it easier to remove.

 

Heating method: Use a hair dryer to heat the protective film, hot air can soften the glue and make it easier to peel off. Be careful to start heating from the edge of the protective film and avoid blowing directly on the surface of the furniture for a long time to prevent damage to the furniture.

 

Use adhesive tape : Attach the tape to the protective film several times and then pull the tape violently, which may tear off the protective film all together. This method takes advantage of the adhesive tape's adhesion to help remove the protective film.

 

Scraping method: Use a plastic scraper to carefully scrape off the protective film step by step from the edges to avoid scratching the surface of the furniture. This method can be used if the protective film area is small.

 

When trying these methods, it is advisable to test them first in an inconspicuous place to ensure that no damage is caused to the furniture. If the protective film is difficult to remove, it may be necessary to use stronger solvents or specialized tools, but be aware of the safety when handling and the potential impact on the furniture.

 

Send Inquiry